Skip to content
SETX Garage DoorReferral service · We don't do the workMenuGet a price

Garage Door Spring Repair in Beaumont, TX

Broken springs are replaced, not patched. HomeAdvisor puts two springs on one door at about $150 to $350.

  • Free to use
  • One local company, not a list
  • No obligation to hire

Referral website, not the contractor. How it works

A broken garage door spring gets replaced, usually both springs at once, and HomeAdvisor puts torsion springs at about $75 to $150 each. Springs hold the door's weight under high tension, so the door industry says a trained technician should do the work.

SETX Garage Door is a referral website, not a garage door company. We send your request to one independent local garage door company. You never pay us; companies we refer you to may pay us for referrals. If you think a spring has broken, send a request with the form.

Door stuck open, or a car trapped inside? Leave the door where it is, don't pull the red emergency release cord, and send a request with the form.

How to tell a garage door spring has broken

The opener doesn't lift the door; the springs do. The opener only guides a door the springs have already balanced. When a spring breaks, these are the usual signs:

  • A loud bang from the garage, often when nobody was using the door.
  • A gap in the coil. A torsion spring on the bar above the door will show a visible break where the coil separated.
  • The door feels very heavy when you lift it by hand, or it won't stay put halfway up.
  • The opener strains or quits after lifting the door a few inches.
  • The door rises crooked, or a cable hangs slack on one side.
  • An extension spring hangs loose along the track, or looks stretched next to its partner.

DASMA's inspection checklist (TDS 167) says that if a spring is broken, don't operate the door until it's replaced. Leave it closed if you can.

Get a price from a local pro

Referral service: your request goes to one independent local garage door company. You never pay us; that company may pay us for the referral. We share your request only with the one company it goes to. Privacy.

Torsion or extension: which springs do you have?

Look above the door opening and along the ceiling tracks. The company will price the job faster if you can say which type you have.

Torsion springs Extension springs
Where they are On a steel bar across the top of the door opening Along the horizontal tracks, one per side
How they work Wind up and turn cable drums to lift the door Stretch as the door closes, then pull it up
Rated life (HomeAdvisor) About 10,000 to 20,000 cycles (8 to 15 years) About 8,000 to 15,000 cycles (7 to 12 years)
National price per spring, installed (HomeAdvisor) About $75 to $150 About $50 to $100
One-piece (tilt-up) doors Rare HomeAdvisor says tilt-up doors use extension springs

Extension springs should have a safety cable running through each spring and anchored at both ends. DASMA says that cable keeps a broken spring contained. If yours don't have one, ask the company to add them.

Why springs rust out in Southeast Texas

Springs fail from metal fatigue: every open and close uses up part of a spring's rated life. Coastal weather adds to that.

Damp air most of the year. The normal yearly rainfall at Jack Brooks Regional Airport is 62.13 inches (1991–2020), per a National Weather Service Lake Charles meteorologist quoted by the Beaumont Enterprise. Steel that stays damp rusts, and a spring with rust on its coils is worth having checked before it's due.

Salt near the water. The American Galvanizers Association says humidity plus airborne chlorides from nearby water make marine climates almost as corrosive as industrial ones, and that wind direction and distance from the coast change the rate. Homes close to Sabine Lake or the Gulf get more of it than homes farther inland.

Rusty bearings and rollers. Rust in the bearings at each end of the torsion bar, or in the rollers, adds friction. The springs and opener work harder every cycle. Ask the company to check those parts during a spring job, and ask about corrosion-resistant hardware if you're close to the water.

A heavier door than the springs were sized for. If someone swapped a thin door for an insulated or wind-rated door and kept the old springs, they may be undersized. Springs should be matched to the door's weight, not copied from the old ones.

Why this isn't a weekend project

Spring replacement videos make it look quick. They don't show what goes wrong.

DASMA describes the garage door as "typically the largest moving appliance in the home" and says its operation "requires a high degree of spring tension." Its homeowner safety tips say spring systems "should be repaired only by trained professionals" and that lift cables "should be replaced only by a trained technician."

The injuries are on record. A 1992 New Jersey workplace-death investigation, archived by the CDC, describes an overhead door mechanic killed when a torsion spring plate "spun explosively under the tension of the torsion springs," knocking him off a ladder. A case series from Massachusetts Eye and Ear described seven patients, seen between 2008 and 2023, who suffered open-globe eye injuries when a spring came loose while they were trying to fix a jammed garage door.

Winding a torsion spring takes winding bars, the right spring size and a sense of how much tension a given door needs. The wrong spring, or the wrong number of turns, leaves a door that slams down or won't stay closed.

What garage door spring repair costs

HomeAdvisor's national figures, checked in October 2026:

  • Torsion springs: about $75 to $150 per spring, parts and labor.
  • Extension springs: about $50 to $100 per spring.
  • Two springs on one single door: about $150 to $350.
  • Springs on two single doors (two springs each): about $275 to $425.
  • Double doors: larger springs often add about $15 to $30 per spring.

What moves your price: the spring type, how many springs the door uses, the door's weight, whether you choose higher-cycle springs, and whether rusted cables, drums or bearings need replacing at the same visit. Some companies charge a service-call fee; ask whether it counts toward the repair. Pricing and scheduling come from the company. The garage door repair cost guide has the full price table.

What a good spring job includes

  1. A look at the whole system. Cables, drums, bottom brackets, bearings, rollers and the opener, since a spring break can damage the parts around it.
  2. Measuring. Springs are sized by wire thickness, inside diameter and length, matched to the door's weight and height.
  3. Both springs on a two-spring door, as DASMA advises.
  4. Balancing. A balanced door stays put when it's lifted halfway by hand.
  5. Testing. The opener's force and safety-reverse settings are checked after the springs go on.

Before you say yes

  • What spring size and cycle rating are you installing?
  • Are you replacing both springs? If not, why not?
  • Is the price all-in, including the trip?
  • Ask about warranty terms on the springs and the labor, and get them in writing.
  • Did you find rust on the cables, bottom brackets or bearings? What happens if I wait?

Related repairs

A spring that snaps can throw a cable or pull the door off its track; see off-track and cable repair. An opener that kept straining against a dead spring may have worn gears; see garage door opener repair. More questions are answered in the garage door FAQ.

The form takes spring repair requests from Beaumont and from Port Arthur, Nederland, Port Neches and Vidor.

Common questions

Can you replace just one spring on a garage door?

You can, but DASMA's homeowner safety tips say that if your door has two springs, you should replace both, even if only one is broken. Both springs have done the same number of cycles, so the second one is close behind. Replacing both also keeps the door balanced.

Can I manually lift my garage door if the spring is broken?

Don't try. The springs carry most of the door's weight. With one broken, you'd be lifting the whole door, and it can drop without warning. DASMA's inspection checklist (TDS 167) says not to operate the door until a broken spring is replaced.

Is it worth fixing a garage door spring?

Usually, yes. A spring job is one of the cheaper ways to get a working door back: HomeAdvisor puts torsion springs at about $75 to $150 each. It's worth pricing a new door instead if the bottom section has rusted through, several panels are damaged, or you need a wind-rated door anyway.

How long do garage door springs last?

HomeAdvisor rates torsion springs at about 10,000 to 20,000 cycles, roughly 8 to 15 years, and extension springs at about 8,000 to 15,000 cycles, roughly 7 to 12 years. One cycle is one open and one close, so a door used as the family's front entrance wears its springs out faster.

Should I oil my garage door springs?

For squeaky springs, DASMA suggests a spray-on lubricant made for garage doors before calling a technician. Spraying the coils is fine. Don't loosen, adjust or wind anything. If a spring is rusted, ask a company to look at it rather than oiling over the problem.

Sources (9)
  1. HomeAdvisor: garage door spring repair cost (updated June 17, 2026)
  2. HomeAdvisor: garage door repair cost (updated June 20, 2026)
  3. DASMA: torsion spring safety
  4. DASMA: garage door safety tips for homeowners
  5. DASMA TDS 167: checklist for home inspectors and consumers
  6. NJ FACE report 92NJ008: overhead door mechanic killed by a torsion spring plate (CDC Stacks)
  7. Open globe injuries from garage door springs (case series, Massachusetts Eye and Ear)
  8. American Galvanizers Association: atmospheric corrosion of galvanized steel
  9. Beaumont Enterprise: Southeast Texas yearly rainfall (NWS Lake Charles 1991-2020 normal)

Last updated 2026-10-23

Get a price